Skip to content
Kemo SAT

Troubleshooting

Kemo IPTV Buffering — How to Fix It

Most Kemo IPTV buffering comes from the home network, not the server. Restart the router and the device, connect by Ethernet or 5 GHz Wi-Fi, stop other downloads, switch the player's decoder, and try the channel's HD instead of 4K version. If several channels buffer on a wired connection, contact support.

What causes this?

These are the usual causes, from most to least common. Knowing which one applies saves time — and tells you whether the fix is on your side or ours.

  • Weak Wi-Fi

    2.4 GHz Wi-Fi through walls often drops below the 25 Mbps needed for steady HD.

  • Busy network

    Game downloads, cloud backups and other streams compete for bandwidth at peak hours.

  • Tired device

    Sticks with full storage or little memory struggle to decode live streams.

  • ISP throttling

    Some providers slow video traffic in the evening; a VPN can help in that case.

  • Single channel issue

    Sometimes one channel source has a problem while the others are fine.

How to fix it, step by step

Work through the steps in order and test after each one. Most people are back to watching by step three.

  1. Step 1: Test another channel

    If only one channel buffers, it's that source — try its backup version (often marked HD/FHD) and tell us the channel name.

  2. Step 2: Restart in the right order

    Unplug the router for 30 seconds, plug it back, wait two minutes, then restart your TV device.

  3. Step 3: Check your speed on the device

    Run a speed test on the streaming device itself (the Downloader app or the player's built-in test). Aim for 25 Mbps for HD and 40 Mbps for 4K.

  4. Step 4: Use a cable or 5 GHz

    Connect by Ethernet, or move the device closer to the router on the 5 GHz band.

  5. Step 5: Switch the decoder

    In the player settings, switch between hardware (HW) and software (SW) decoding or change the player engine.

  6. Step 6: Clear the cache

    Settings → Applications → [player] → Clear cache. Don't clear data unless you're ready to sign in again.

  7. Step 7: Try a VPN

    If buffering happens at the same time every evening, your internet provider may be throttling video. A reputable VPN can confirm it.

How to prevent it

  • Keep 1 GB free on sticks and boxes
  • Restart the device once a week
  • Use the HD version of a channel on slower connections
  • Don't use more devices than your plan's connections

When should I contact support?

Several channels buffer on a wired connection with a good speed test, or buffering started at the same moment for everyone in your home. Send your order ID, device, app and a photo of the screen.

First, check the service status page.

Last updated