Skip to content
Kemo SAT

Troubleshooting

No Sound or Audio Out of Sync on Kemo SAT — How to Fix It

When a Kemo SAT channel has no sound, change the audio track in the player and turn off audio passthrough (or set it to PCM). If sound is out of sync, switch the decoder between hardware and software, or use the player's audio delay setting. A soundbar may need Dolby passthrough disabled.

What causes this?

These are the usual causes, from most to least common. Knowing which one applies saves time — and tells you whether the fix is on your side or ours.

  • Unsupported audio format

    Your TV or soundbar can't decode a Dolby/AC3 track sent as passthrough.

  • Wrong audio track

    Some channels have several languages or an empty secondary track.

  • Decoder mismatch

    Hardware decoding on some devices causes drift between picture and sound.

  • Soundbar processing

    Soundbars add delay, especially with surround modes.

How to fix it, step by step

Work through the steps in order and test after each one. Most people are back to watching by step three.

  1. Step 1: Change the audio track

    During playback open the player menu (TiviMate: OK → Audio; Smarters: the audio icon) and pick another track.

  2. Step 2: Disable passthrough

    Fire TV: Settings → Display & Sounds → Audio → Dolby Digital Output → PCM. Android TV: Settings → Display & Sound → Audio → Surround → Never.

  3. Step 3: Switch decoder

    Player settings → Playback → Decoder: try SW or HW+ instead of HW.

  4. Step 4: Set audio delay

    Many players have an audio delay setting; adjust in steps of 50 ms until lips match.

  5. Step 5: Bypass the soundbar

    Test with TV speakers. If sync is fine, change the soundbar's mode or turn off its night/surround modes.

How to prevent it

  • Use PCM output with older soundbars
  • Keep player apps up to date

When should I contact support?

The same channel has no sound on every device and every app. Send your order ID, device, app and a photo of the screen.

First, check the service status page.

Last updated